Step 2: Configuration; Connect To Your Icr-01 Smart Receiver - FrontRow ICR-01 Installer's Manual

Step 2: Configuration

Your ICR-01 Smart Receiver has several parameters that can be configured to tell it how to communicate with other devices in
an ezRoom or Conductor installation. While each installation is different most of the default parameters will be appropriate.

1. Connect to your ICR-01 Smart Receiver

• Connect your laptop computer's LAN port to the ICR-01 LAN port with a CAT-5, or network, cable.
• Change the IPv4 address on your laptop to static address 192.168.1.100. See Appendix B for instructions.
• Open a web browser on your laptop and in the URL field type the IPv4 address 192.168.1.103 and press enter. This is
the default static IP address of the ICR-01 and will likely be changed when you configure it per the school's IP
addressing scheme.
• You will be connected to your ICR-01 Smart Receiver and see a screen like this:
ICR-01 Bottom
4