FrontRow ICR-01 Installer's Manual page 29

Network (NET) Commands*
Syntax: #NET[Connection, String Type. Device 'Command'];
Name Required/Optional
Connection Required
String Type Optional
Device Required
Command Required
Example: (increments the audio input channel of a Juno Connect by one over TCP/IP protocol using an ASCII string):
#NET[F1,@{shortcutname},'#AIN1[I1,L+];'];
Intercom (HTP Commands
Syntax:#HTP[http://Server/calypso/conductor/?/call/Device];
Name Required/Optional
Server Required
Device Required
Example: (initiates an intercom request to the admin station located in the office):
#HTP[http://@[servername]/calypso/conductor/?/call/@][roomedevicename}];
Data Type Format
Variant Fn
where n is 1 or 2
Variant Tn
where n is 1 or 2
Variant If using Shortcuts (recommended):
@{shortcutname}
For explicit device references:
IAddress, PPort
Default port is 7267
Variant Specific to device. For device
commands, see manufacturers
instructions
Data Type Format
Variant If using Shortcuts (recommended):
@{shortcutname}
For explicit device references:
IP address of the Conductor server
Variant If using Shortcuts (recommended):
@{shortcutname}
For explicit device references:
IP address of Juno Connect or Smart
Receiver
26
Description
Defines the connection type:
• TCP/IP (1)
• UDP (2)
Defines the string type:
• ASCII string (1)
• HEX string (2)
If you leave StringType blank,
a default of T1 is assumed
A string expression that is the
valid name of a shortcut (see
section 8) or the IP address
and port of the device being
controlled.
A string expression that
contains the command.
Description
A string expression that is
the valid name of a shortcut
(see section 8) or the IP
address of the Conductor
server.
A string expression that is
the valid name of a shortcut
(see section 8) or the IP
address of a Juno Connect
or Smart Receiver located on
the network.