Service; Fig.12 Data Plate - Igloo EWA 500.P User Manual

The device is working too loud...– Make sure that:
• The device is standing stably and is properly levelled
• Furniture adjoining the device do not vibrate when the compressor is working
• Internal elements have been properly mounted
Noises made by the operating device are a normal phenomenon. The devices are equipped with ventila-
tors, engines and compressors, which turn on and off automatically. Each compressor makes certain noises
when operating. These sounds are made by the aggregate engine and by cooling agent fl owing through the
circuit. This phenomenon constitutes a technical feature of cooling devices and it does not signify their faulty
work.
Steam precipitation on glasses of the device is a normal phenomenon in case of high relative air
humidity exceeding 60% and does not require calling the service!

6.2. SERVICE

IGLOO service telephone number: +48 (14) 662 19 56 or +48 605 606 071, e-mail: serwis@igloo.pl
If after checking points described in chapter 6.1 "Fault identifi cation and repair" the device still does not work properly,
please contact Technical Service of the Igloo company, stating the data from the data plate Fig. 12 (p.22):
Fig. 12 Data plate
22
User manual Medium-freezing and freezing cabinets
• Serial number (NS)
• Production date
• Type (name of the device)
and
• Date when the device was purchased
• Description of the problem
• Your exact address and telephone number (with the code number)
The above fi gure shows a demonstrative data plate
and the data stated on the plate are exemplary data,
which are not related with display cabinets!
en
www.igloo.pl