Table of Contents
Advertisement
Installation and operation
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.2
Operation
CAUTION!
Risk of scalding!
The surfaces of the ventilated aluminium reflectors and infrared lamps
become very hot during operation.
Never touch the hot surface of the appliance.
The GN basin / GN tray with food become hot during the warm-keeping
phase, and they also remain hot for some time after finishing the
operation.
When removing GN basins / GN trays use protective oven meats resistant
to high temperature or kitchen cloths.
1. Before operating the food warmer, clean it according to the instructions in
section 6 'Cleaning'.
2. Prepare the required food and suitable GN basins / GN trays with them.
3. Plug the appliance into a suitable single socket.
114282
EN
13 / 18
Advertisement
Table of Contents
