Assembly
The assembly of the appliance should be carried out in the following steps (Fig. 2):
1. Place the bottom frame (1) with the tube (3) on an even surface.
2. Place the enclosed extension tube (2) in the bottom frame tube (3).
3. Fix the top lamp holder (4) with aluminium reflectors (8) in the extension tube (2)
to the lamp holder (5), using the fixing screw.
4. Set the desired height of the top lamp holder (4) and fix it with the height
EN
adjustment screw (6) on the bottom frame (1) with tube (3).
5. Screw the enclosed infrared lamps in (9).
12 / 18
Installation and operation
Fig. 2
114282