What's Next; History For The Firepower 2100 In Platform Mode - Cisco Firepower 2100 Getting Started Manual

What's Next

Type help or '?' for a list of available commands.
ciscoasa>
Step 3
If you SSH to the ASA (after you configure SSH access in the ASA), connect to the FXOS CLI.
connect fxos
You are prompted to authenticate for FXOS; use the default username: admin and password: Admin123. To
return to the ASA CLI, enter exit or type Ctrl-Shift-6, x.
Example:
ciscoasa# connect fxos
Connecting to fxos.
Connected to fxos. Escape character sequence is 'CTRL-^X'.
FXOS 2.2(2.32) kp2110
firepower-2110 login: admin
Password: Admin123
Last login: Sat Jan 23 16:20:16 UTC 2017 on pts/1
Successful login attempts for user 'admin' : 4
Cisco Firepower Extensible Operating System (FX-OS) Software
[...]
firepower-2110#
firepower-2110# exit
Remote card closed command session. Press any key to continue.
Connection with fxos terminated.
Type help or '?' for a list of available commands.
ciscoasa#
What's Next
• To continue configuring your ASA, see the documents available for your software version at
• To configure FXOS chassis settings, see the
• For troubleshooting, see the

History for the Firepower 2100 in Platform Mode

Feature Name Version
The default mode 9.13(1)
changed to Appliance
mode
Cisco Firepower 2100 Getting Started Guide
216
the Cisco ASA Series Documentation.
Feature Information
With the introduction of Appliance mode, the default mode was changed to Appliance mode. In
earlier releases, the only mode available was Platform mode. If you are upgrading to 9.13(1),
the mode will remain in Platform mode.
New/Modified commands: fxos mode appliance, show fxos mode
FXOS configuration
FXOS troubleshooting guide.
ASA Deployment with ASDM
Navigating
guide.