Cisco Firepower 2100 Getting Started Manual page 149

Firepower Threat Defense Deployment with CDO
j) (6.6) Refresh the Cloud Services page. If the device successfully registered with the Cisco cloud, on the
Cisco Defense Orchestrator tile, click Enable.
For 6.7+, you can enable CDO at the time of registration.
Step 9 Return to CDO. In the Smart License area, apply your Smart License to the FTD device and click Next.
For more information, see
90-day evaluation license.
Step 10
In the Done area, click Go to devices to view the onboarded device.
Step 11 On Devices & Services, observe that the device status progresses from "Unprovisioned" to "Locating" to
"Syncing" to "Synced".
Onboard an FTD with a Registration Key (Version 6.4 or 6.5)
Follow this procedure to onboard an FTD device using a registration key.
Before you begin
• (Version 6.5) This method is supported for the US, EU, and APJ (apj.cdo.cisco.com) regions.
• Your device MUST be managed by Firepower Device Manager (FDM). Make sure that there are no
• Your device should be configured to use the 90-day evaluation license. You will need to unregister the
• Make sure DNS is configured properly on your FTD device.
• Make sure the time services are configured properly on the FTD device. Make sure the FTD device shows
Procedure
Step 1 In the CDO navigation pane, click Devices & Services, then click the blue plus button (
device.
Step 2 Click the FTD card.
Step 3
Click Use Registration Key.
Step 4 Complete the Device Name area fields.
Configure Licensing, on page
(Version 6.4) This method is only supported for the US region (defenseorchestrator.com). For version
6.4 for the EU region (defenseorchestrator.eu), you can only onboard your FTD device using username,
password, and IP address. You cannot use a registration key.
pending changes waiting on the device.
FTD if it is already smart-licensed. On the FDM Device > > Smart License page, from the gear
drop-down menu choose Unregister Device.
the correct date and time, otherwise the onboarding will fail.
Onboard an FTD with a Registration Key (Version 6.4 or 6.5)
155. Click Skip to continue the onboarding with a
Cisco Firepower 2100 Getting Started Guide
) to Onboard a
147