Cleaning, Maintenance And Repair; Storage And Transportation; Disposal - Kaiser K113-4BJCI Assembly Instructions Manual

4 burner gas bbq with side burner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

CLEANING, MAINTENANCE AND REPAIR

WARNING!
Always switch the appliance off and let it cool down before performing inspection, maintenance and cleaning work!
Do not immerse burner(s) into water or other liquids. If they become wet, let them dry thoroughly and check the function afterwards.
Cleaning
1. Clean the appliance after each use with a slightly damp cloth and a little soap. Use a brush for hard to reach places.
2. Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean this appliance as they might be harmful to its
surfaces.
Stainless steel surfaces
1. Wipe all stainless steel surfaces with a wet soft cloth. Use a mild detergent to remove grease.
2. Remove grease and food remains from the fire box with a plastic or wooden spatula.
3. Remove the burner(s) before cleaning the fire box.
Grease tray(s)
1. Avoid that the grease tray(s) overflow(s). Empty regularly during use.
2. Clean the grease tray(s) after each use using warm water and a mild detergent.
NOTE: Add sand or cat litter to the grease tray(s) before use to avoid that the grease sticks on the surface.
MAINTENANCE
Before and after each use, check the appliance or accessories or attachments for wear and damage. If required, exchange them for new ones as described in this
instruction manual. Observe the technical requirements (→ TECHNICAL DATA).
Burner
1. A conversion to a different gas type must be done by qualified personnel or your retailer only.
2. Clean the burner(s) at least once per year or whenever they get dusty.
3. Make sure that no dust or insects get inside the burner(s) openings or the air intake.
4. Clean the burner(s) with a pipe cleaner. Use a wire brush to clean any rust from the surface of the burner(s).
5. Make sure that the valve outlets of the valve unit are placed exactly in the air funnels of the / each burner, when assembling
the appliance.
6. Perform a visual check of the burner(s) flames regularly as follows:
a. Remove cooking grids and flame tamers.
b. Light the burner(s).
c. Turn control knob(s) from HI to LO. Check the flame status. The flame in LO position should be smaller than in HI
position (Fig. 1).
Always check flame before each use, if anything seems out of the ordinary (→ TROUBLESHOOTING).
REPAIR
This appliance does not contain any parts that can be repaired by the consumer. Contact a qualified specialist to have it checked and repaired.
WARNING!
Always make sure all safeguards, if available, have been reinstalled safely and correctly after each cleaning or maintenance! Never use the appliance
without its safeguards!

STORAGE AND TRANSPORTATION

STORAGE
1. Switch the appliance off and remove the batteries.
2. Clean the appliance as described above.
3. Cover the burner(s) with aluminium foil so that no dust or insects collect inside.
4. Disconnect the gas cylinder(s) and store it / them in an outdoor location. Make sure that the gas cylinder(s) is / are not stored near heat sources or in direct
sunlight.
5. Do not store a spare gas cylinder under or near this appliance.
6. Store the appliance and its accessories in a dry, frost-free place. The ideal storage temperature is between 10 °C and 30 °C.
7. Always store the appliance in a place that is inaccessible to children.
8. We recommend using the original package for storage where possible or covering the appliance with a suitable cloth to protect it against dust.
9. Clean the appliance itself and the burner(s) thoroughly before use, if the appliance has been stored for a long period of time.
TRANSPORTATION
1. Switch the appliance off and remove the batteries.
2. Attach transportation guards, if applicable.
3. Always push or pull the appliance by its handle / gripping surfaces.
4. Protect the appliance from any heavy impact or strong vibrations which may occur during transportation in vehicles.
5. Secure the appliance to prevent it from slipping or falling over.

DISPOSAL

Environmental Protection
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively support us in conserving resources
and protecting the environment by returning this appliance to the collection centres.
13
GB
1
HI
LO

Advertisement

Table of Contents
loading

Table of Contents