Perma STAR VARIO Quick Start Manual

perma STAR VARIO - Quick Start Guide
1. Predefi ne installation / Select lubricant, discharge period + connecting parts
Average lubricant discharge chart (approximate)
2. Prepare lube-point
Clean lube-point
For direct mounting:
Prefi ll lube-point and any connecting parts
(use the same grease that is contained in the lubrication system)
3. Activation / Installation of lubrication system
Screw control unit onto LC unit until
Assembly arrow lines up (see enlargement)
www.permausa.com
Examples: Bearing lubrication
Direct mounting
Remove grease fi tting
For remote mounting:
Prefi ll lube-point and any grease lines / connections
(use the same grease that is contained in the lubrication system)
SET
7
1...
2
07/2019
01/2020
LC 60 120 250
Note
activation / exchange
Select LC unit
date on label 60, 120, 250 cc
Mounting bracket
STAR Standard Duty
1-point G1/4 female
(109663)
Reducer G1/4
male x 1/4" NPT
female (901000)
Support fl ange STAR
Hose connector
1/4" NPT male for
Reducer
hose iØ 3/8" -
push-on (901007)
Remote mounting  for lube-points with vibration,
limited mounting space, high temperature
Add reducer, support fl ange
and tubes (if required)
Pressure check: Lube-point / all connecting parts
(refer to perma STAR VARIO installation guide for details)
SET
LC 60 120 250
Select discharge period
Remove plug
1 - 12 months
Support fl ange STAR
G1/4 male x G1/4
female (109420)
Hose connector 1/4" NPT
male for hose iØ 3/8" -
push-on (901007)
Heavy Duty hose up to
260 °F / 127 °C iØ 3/8"
black (901006)
Reducer (will depend on
grease fi tting size)
Add sealant