Install The Display Unit (Ilx-F509E/Ilx-F511E) - Alpine iLX-507E Owner's Manual

Install the display unit (iLX-F509E/
iLX-F511E)
1
Fix the Display unit to the slider of the main
unit using 4 screws (M5×8).
Screws (M5×8) (Included)
CAUTION
Do not adjust the display angle when the display
unit is not fixed to the slider of the main unit using
4 screws (M5×8). Doing so may not turn power on.
2
Mount the Power Plate.
Power Plate (Included)
• If the Power Plate is not mounted, the display unit
may not be turned power on. Make sure to mount
it.
68
-EN
ALPINE iLX-F509E 68-41657Z84-A (EN)
3
Mount the Cover Hinge using 2 screws
(M3×4).
Secure the screws, then attach the Sheet
Hinges.
Screws (M3×4)
(Included)
Sheet Hinges
(Included)
Cover Hinge
(Included)