Connecting The Device Registered In The Device List; Disconnecting The Connected Device; Deleting A Bluetooth Device From The List; Wi-Fi Setup - Alpine iLX-507E Owner's Manual

4
When a code is displayed on the device, check
that the code is the same as the one on the
screen of the unit, and touch [Yes].
When the device connection is complete, a message
appears and the device returns to normal mode.
Connecting the Device Registered in
the Device List
Select one of 10 paired Bluetooth or Wi-Fi compatible
devices that you previously registered.
1
Touch [Connect] of the device you want to
connect from the Paired Device list.
The Function Select screen is displayed.
2
Select the function of the connecting device
on the Function Select screen, and touch [OK].
A check mark is displayed for the selected function.
When the device connection is complete, a message
appears and the device returns to normal mode.

Disconnecting the Connected Device

Touch [Disconnect] of the device you want to
disconnect from the Paired Device list.
The device is disconnected.
Deleting a Bluetooth Device from the
list
You can delete the information of a previously connected
Bluetooth compatible device.
1
Touch [ ] (Delete) of the Bluetooth
compatible device to delete from the Paired
Device list.
2
Touch [Yes].
• Touching [No] will cancel the setting.

Wi-Fi Setup

[Wi-Fi] is selected on the Device Setup menu screen.

Setting the Wi-Fi

Set to [On] when using Apple CarPlay with a wireless
connection.
Setting item:
Wi-Fi
Touch [ ] (Off) or [

Bluetooth Setup

[Bluetooth] is selected on the Device Setup menu screen.

Setting the Bluetooth

Set to [On] when connecting the unit to the Bluetooth
compatible device.
Setting item:
Bluetooth
Touch [ ] (Off) or [
"Bluetooth".

Setting the Auto Connection

You can connect the last connected device automatically.
Setting item:
Auto Connection
Touch [ ] (Off) or [
Connection".

Setting the PIN Code

You can set the PIN code for connecting with a BLUETOOTH
compatible device.
Setting item:
Bluetooth PIN Code
1
Touch [Bluetooth PIN Code].
A numeric keypad screen is displayed.
2
Touch [Delete All].
The displayed PIN code is cleared, then you can enter
the new PIN code.
3
Enter a 4-digit passcode, and then touch [OK].
• The initial number is 0000.
• Touch [ ] to delete an entered number.
• Touch [Delete All] to delete all entered numbers.
ALPINE iLX-F509E 68-41657Z84-A (EN)
] (On) of "Wi-Fi".
] (On) of
] (On) of "Auto
15
-EN