Table of Contents
Advertisement
Adjusting the display position
(iLX-F509E/iLX-F511E)
Depending on the vehicle, the front-back display position
differs. To adjust the front-back position, set the slider to the
forward position.
Default setting: Back position
1
Remove 4 hexagon bolts from both sides of
the unit.
2
Pull out the slider to the forward position. (To
return the slider to the back position, push it
in.)
Slider
3
Install 4 hexagon bolts to secure the slider.
66
-EN
ALPINE iLX-F509E 68-41657Z84-A (EN)
Installation example using the
Original Mounting Bracket
1
■
Hexagon bolts ×4
■
2
3
4
Mount the original mounting bracket to the
unit using the supplied screws.
• If you do not have the original mounting bracket,
mount the Double din KIT* (provided with the side
mounting bracket), etc. to the main unit.
* Sold separately.
iLX-507E
Original Mounting
Bracket
Screws (M5×8)
(included)
Face plate (Included)
iLX-F509E/iLX-F511E
Original Mounting
Bracket
Connect all other leads of the unit according
to details described in the "Connections"
(page 69).
Mount the unit in a car.
• Fix the cables carefully. Do not damage them by
mounting them into movable parts, such as the seat
rail, or by locating them against sharp or pointed
edges.
Reattach the removed vehicle parts (panels,
etc.) or other aftermarket dash kit back onto
the vehicle.
Screws (M5×8)
(included)
Advertisement
Table of Contents
