Dedicated Tuning According to Your
Car (Car by Car Update)
For some car models, you can perform settings by
downloading the data of the car model from the Alpine
website. Install the data to the unit by using the USB flash
drive.
• Introduction animation, sound dedicated to the car model,
camera connection setting and camera guide line can be set
with the data of the car model.
1
Plug the USB flash drive with the update file
stored into the unit.
2
Touch [Update] of "Car by Car Update".
3
After the confirmation message appears,
touch [OK].
• Do not turn on/off the power, change the ignition key position,
until system restart is completed.
Displaying Software License
Setting contents:
Open-Source Software License
Initializing the Sound Settings
You can restore the EQ Setting*/X-OVER*/Time Correction*/
Media Xpander (MX)/bass engine/Subwoofer to factory
settings.
1
Touch [Set] of "Default Sound Settings".
2
After the confirmation message appears,
touch [OK].
The system starts initialization.
∗ The setting values that are stored in Preset 1 to Preset
3 cannot be initialised.
Initializing the System
You can initialize all data, to restore the factory settings.
Remove the USB flash drive, etc. from the system before
operation.
1
Touch [Reset] of "Clear All Settings".
2
After the confirmation message appears,
touch [OK].
The confirmation screen appears.
3
Touch [OK].
The system starts initialization.
• Do not turn on/off the power, change the ignition key position,
until system restart is completed.
Sound Setup
You can set up items related to the sound quality.
Touch the upper central area [
screen.
The Sound Setup screen is displayed.
• The Sound Setup screen can also be displayed by touching
[
] (HOME) while displaying the Home screen.
■
Sound Setup Menu screen
Current source information display.
Touch this to change to the Home screen.
X-OVER (page 30)
Voltage display.
bass engine (page 31)
Volume level indicator
Time Correction (page 30)
Defeat (page 31)
Tone Adjust (Bass/Treble) (page 31), Sub
Woofer Level (page 31)
EQ Setting (page 28)
Media Xpander (page 28)
Fader/Balance/Rear Speaker/Subwoofer (page
29)
ALPINE iLX-F509E 68-41657Z84-A (EN)
] of the Home
27
-EN