Installation Example Using The Original Mounting Bracket; Install The Display Unit - Alpine HALO9 Installation Manual

Installation example using the Original
Mounting Bracket
1
Mount the original mounting bracket to the main unit
using the supplied screws.
• If
you do not have the original mounting bracket, mount the Double din
KIT-- (provided with the side mounting bracket), etc. to the main unit.
* Sold separately.
Original Mounting Bracket
2
Connect all other leads of the main unit according to
details described in the "Connections" (page 9).
3
Mount the main unit in a car.
• Fix the cables carefully. Do not damage them by mounting them into
movable parts, such as the seat rail, or by locating them against sharp or
pointed edges.
4
Reattach the removed vehicle parts (panels, etc.) or
other aftermarket dash kit back onto the vehicle.
Install the display unit
1
Remove the 2 angle adjustment screws (M4x6) fixing the
left and right sides of the Display unit and pull the top of
the display forward.
Display unit
Angle adjustment screws (M4x6) (left and right)
r
• Vertical positioning screws may need to be removed earlier (See Step
4)
in order to manipulate the screen enough to install the POWER PLATE.
5 -EN