Clearing The Password; Vehicle Type Setup; Steering Wheel Setting; Fuel Type Setting - Alpine iLX-507E Owner's Manual

Clearing the password

1
Touch [ ] (On) of "Security Code".
The password setting screen is displayed.
2
Enter the password you have set, then touch
[OK].
The password is cleared and the system returns to the
System Setup Menu screen, then the Security Code is
set to [Off].
• Input numbers are displayed as "*".

Vehicle Type Setup

[Vehicle Types for Phone Link] is selected on the System
Setup Menu screen.
Apple CarPlay and Android Auto require information about
the vehicle to use all functions in the best possible way.
Setting item:
Vehicle Types for Phone Link

Steering wheel Setting

Set this item when Apple CarPlay is used/Android
smartphone which installed Android Auto App is
connected.
This setting influences Apple CarPlay/Android Auto mode.
Setting item:
Steering wheel
Setting contents:
Left (Initial setting) / Right

Fuel Type Setting

Set the Fuel type of your car.
Setting item:
Fuel Type
Setting contents:
Unknown / Unleaded gasoline (Initial setting) / Leaded
gasoline / Diesel #1 / Diesel #2 / Biodiesel / 85% ethanol/
gasoline blend / Liquified petroleum gas / Compressed
natural gas / Liquified natural gas / Electric / Hydrogen
fuel cell / Other

EV Connector Type Setting

When [Electric] is selected for "Fuel Type Setting" (page
26), set EV Connector Type.
Setting item:
EV Connector Type
Setting contents:
Unknown (Initial setting) / J1772 / Mennekes / Chademo
/ Combo_1 / Combo_2 / Tesla roadster / Tesla HPWC /
Tesla Supercharger / GBT / Other
26
-EN
ALPINE iLX-F509E 68-41657Z84-A (EN)

Installation Setup

[Installation Status] is selected on the System Setup Menu
screen.
Vehicle Setup enables you to check the installation status of
Camera 1, Camera 2, Dash Cam*, GNSS Antenna, GNSS
Information, Parking, Vehicle Speed, Reverse, Battery
Voltage.
∗ Dash Cam is displayed in the Installation Setup, but this
unit does not support it.
Setting item:
Installation Status
The Installation check screen is displayed.
• Depending on your vehicle, some installation status may not
be checked via this function.

About iLX-507E/iLX-F509E/iLX-F511E

[About] is selected on the System Setup Menu screen.
By using [About], the Serial Number and Model name can
be checked, the Firmware Version can be updated, and
various settings can be initialized.

Displaying the Product Information

You can view the version information of this product. Make
note of this information and refer to it whenever you
contact Alpine Tech Support or an Alpine-authorized dealer.
Setting contents:
Serial Number / Model Name

Updating Firmware Version

Download the firmware from the Alpine website and
update the product using the USB flash drive.
1
Plug the USB flash drive with the update file
stored into the unit.
2
Touch [Update] of "Firmware Version".
3
After the confirmation message appears,
touch [OK].
• Do not turn on/off the power, change the ignition key position,
until system restart is completed.