Ecom ECD2800 User Manual page 44

Fiber optic cables installation:
Please follow the steps described below for fiber optic cables installation and external cell
connection:
Note: External cell and fiber optic cables have to be ordered separately according to
customer needs.
Note: The sample signal level is adjusted at 100% using two 1 m long fiber optic cables
connected with the test cell ZK EX. This connection is used also for easy detector
44 / 47
ECD2800 / ECD2600
Before connecting fiber optic
cables, remove the connector
cover first and unplug the SMA
connector of the optical cable.
Screw in the SMA connector
for output.
For input unplug both parts of
connector and screw in the
SMA connector.
Test cell ZK EX is used for
easy diagnostics of detectors
and lamp intensity measuring.
Connected test
working cell.
cell and