Flywheel Installation - Polaris 850 PRO-RMK 155 2020 Manual

ENGINE / COOLING / EXHAUST
r
5. Install the fasteners
TORQUE
Trigger Coil Fasteners:
53 in-lbs (6 N·m)
6. Install the flywheel. See Flywheel Installation page
3.66.

FLYWHEEL INSTALLATION

1. Carefully install the flywheel
NOTICE
Ensure the key aligns with the notch in the flywheel
during installation.
3.66
securing the trigger coils.
q
.
2. Secure the flywheel using the Flywheel Holding tool.
Start by aligning all the mounting holes and install the
two shoulder bolts into the flywheel until they bottom
out. Then install three of the fasteners from the recoil
starter pulley into the crankcase.
Flywheel Holding Tool:
Ensure there is a little play and the flywheel is able to
move freely when all fasteners are installed.
3. Install the flywheel nut
specification.
Do not use an impact wrench to install the flywheel nut.
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
PU-52602
NOTICE
w
and torque nut to
TORQUE
Flywheel Nut:
90 ft-lbs (122 N·m)
IMPORTANT
© Copyright Polaris Inc.