Drive Belt Installation - Polaris FST IQ Cruiser Owner's Manual

Clutch System

Drive Belt Installation

1. Drop the drive belt over the drive
clutch and pull back the slack.
NOTE:
To ensure satisfactory belt life,
install belts so they operate in
the same direction of rotation by
positioning the identification
numbers so that you can read
them. If required, separate the
sheaves as outlined in the belt
removal procedures.
2. Rotate the L-wrench counter-clockwise to tighten the sheaves while
working the belt to the outer edge of the sheaves.
3. Remove the wrench.
4. Reinstall the side panel.
5. Close and secure the hood.
MAINTENANCE
139