Polaris 850 PRO-RMK 155 2020 Manual page 320

ENGINE / COOLING / EXHAUST
High-Port (Upper / Lower Blades Fully Retracted)
8. If the actuator cable functions properly during the
travel test, it is recommended to re-assemble the
cable onto the servo motor lever pin. No further
service is required.
9. If the actuator cable does not travel the specified full
in / full out distance, sticks, or is damaged, E-VES
service is recommended. See Engine chapter for
more information.
10. To reinstall the actuator cable, verify the cable
routed over the bulkhead cross tube
NOTICE
Exhaust pipe removed in image for clarity.
11. Install the cable rod end back onto the servo motor
e
lever pin .
12. Install cable staked nut into bracket. Verify the staked
nut hex is seated in bracket
13. Install nut and torque to specification.
TORQUE
E-VES Actuator Cable Jam Nut:
13 ft-lbs (18 N·m)
3.120
q
is
w
.
r
.
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.