Switches; Ignition Switch; Oil Level Sender; Auxiliary Stop Switch - Polaris 850 PRO-RMK 155 2020 Manual

Table of Contents

BATTERY / ELECTRICAL

SWITCHES

Test the ignition switch using a digital multimeter.

Reference the continuity table and test each circuit as

the key is turned. Replace ignition switch if testing

indicates an open connection.

PIN CONTINUITY

SWITCH POSITION

The keys used with the 3 position key switch can be

duplicated only by obtaining a key blank and having it

cut by mating it with an existing key.

If both of the original keys are lost, the ignition switch

assembly must be replaced.

CONTINUITY BETWEEN

Pins E and F

Pins C and D

Pins A and F

Pins A and B

Pins C and D

9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual

To test the oil level sender, position the sender as it

would be in the oil tank. Allow the float to drop in the

direction it would if the oil tank were empty. Continuity

should be present when using a multimeter to test the

sender with the float in the "empty" position.

No continuity should be present when the float is moved

away from the "empty" position.

The auxiliary stop switch is a hard stop switch and will

shut off the engine when pushed down.

PIN CONTINUITY

Table of Contents