Drive Belt Installation - Polaris Dragon Owner's Manual

Clutch System

Drive Belt Installation

1. Drop the drive belt over the
drive clutch and pull back the
slack.
NOTE: To ensure satisfactory
belt life, install belts so
they operate in the same
direction of rotation by
positioning the identifica-
tion numbers so that you
can read them. If
required, separate the
sheaves as outlined in
the belt removal proce-
dures.
2. Rotate the L-wrench counterclockwise to tighten the sheaves while
working the belt to the outer edge of the sheaves.
3. Remove the L-wrench.
4. Reinstall the side panel.
5. Close and secure the hood.
MAINTENANCE
99