Storing Current Switch Configuration - Planet GS-5220-8P2T2S Quick Installation Manual

3.3 Storing Current Switch Configuration
In the L2+ Managed PoE+ Switch, the running configuration sequence running-
config can be saved from the RAM to FLASH by "copy" command, so that the
running configuration sequence becomes the start-up configuration file, which is
called configuration save.
At the "#" prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 3-6: Saving Current Configuration Command Screen
If you are not familiar with the console command or the related
parameter, enter "help" anytime in console to get the help
description.
Note
9