Logging On To Console - Planet GS-5220-8P2T2S Quick Installation Manual

3.1 Logging on to Console

Once the terminal is connected to the device, power on the L2+ Managed PoE+
Switch and the terminal will display "running testing procedures". Then, the
following message asks to log in user name and password. The factory default
user name and password are shown as follows and the login screen in Figure 3-3
appears.
Username: admin
Password: admin
Figure 3-3: L2+ Managed PoE+ Switch Console Login Screen
The user can now enter commands to manage the L2+ Managed PoE+ Switch. For
a detailed description of the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
Note
face.
6