Setting The Dancer Arm Sensor - Novexx Solutions XLP 51 Series User Manual

Rewinder XLP 51x
User Manual

SETTING THE DANCER ARM SENSOR

About this task
The dancer arm controls the winding speed of the rewinder by means of a sensor. Bevor applying the
rewinder for the first time, the dancer arm has to be brought in both end positions to adjust the sensor.
Fig. 4: "Loose position" (A) and "Tight position" (B) of the dancer arm.
Procedure
1. Ensure that the dancer arm can move unhindered to position A (picture above, A) driven by the
spring force.
2. Call parameter
3. Press key 4. Display
4. Move the dancer arm against the spring force to the opposite end position (picture at the top, B)
and hold it there. Press button 4.
5. Restart the printer.
Picture shows example value.
1
Edition 2b - 9/2021
Options > Rewinder > Rewinder
[1]
:
[1]
adjust. Display :
11
Setting the dancer arm sensor
Setting up