Canon imageRUNNER ADVANCE DX User Manual page 31

When <Sleep Mode Energy Use> is set to <Low>
● Depending on the utility software, communication may fail if the machine is in sleep mode. Return the
machine from sleep status.
Setting Up Setting up the Network Environment
Method
The description in "IMPORTANT" has been changed (description of the first and second bullet points deleted
and the third bullet point added in "If you selected <Wireless LAN> or <Wired LAN + Wireless LAN>").
● When using a sub line, see "Cautions When Using the Sub Line" in the User's Guide.
If you selected <Wireless LAN> or <Wired LAN + Wireless LAN>
● The settings of <Wireless LAN Settings> are cleared.
● You cannot set wireless LAN as the main line and wired LAN as the sub line.
● Set <Sleep Mode Energy Use> to <High>.
Cautions When Using Wired LAN (Sub Line)
● Set <Sleep Mode Energy Use> to <High>.
Setting Up Setting up the Network Environment
Environment Making SMB Settings
The description of "
changed.
<Require Encryption for Connection>
To request a connection with SMB v3.0 encrypted communication when connecting to an SMB server,
press <On>.
Setting Up Setting up the Network Environment
Environment Making SMB Settings
The description of "NOTE" in "Setting the SMB Server" has been changed.
● If you set <Require Encryption for Connection> to <On>, you will become unable to connect to the
machine from client operating systems that do not support SMB v3.0 encrypted communication.
Other Changes to the User's Guide
<Require Encryption for Connection>" in step 3 of "Setting the SMB Server" has been
Selecting the Network Connection
Adapting to the Network
Adapting to the Network
29