Charge The Headphones - RCA WHP145 Quick Start Manual

1. Install the headphone batteries
To install batteries in the headphones:
1. Remove the ear cushion from the
headphones' right earcup. This
exposes the headphones' two battery
compartments.
2. Insert the two provided rechargeable
batteries. Make sure you match
the polarity (+/–) of each battery
compartment.
3. Line up the posts on the ear cushion with
the holes on the earcup and press the
ear cushion back onto the earcup so that
it snaps in place.
2. Power the charging cradle/transmitter
1. Plug the power adapter into the DC IN
jack on the back of the charging cradle/
transmitter
2. Plug the other end of the power adapter
into a working outlet or surge protector.

3. Charge the headphones

Before you use the headphones for the first time, make sure
you give them a full charge. Leave the headphones in the
charging cradle for 24 hours for this first charge to ensure
maximum battery life.
1. Make sure the headphones' power switch is in
the OFF position.
2. Place the headphones on the cradle/transmitter
as shown here. Make sure the headphones'
charge contacts are touching the charge prongs
on the cradle/transmitter.
The green CHARGE indicator on the cradle/
transmitter's front panel illuminates while the
headphones are charging.
2
Right headphone
Cradle/Transmitter
back
Left
Right