Noise canceling headphones with carrying pouch (2 pages)
Summary of Contents for RCA WHP140
Page 1
Wireless Headphones with 900 MHz transmitter up to feet Thank you for choosing the RCA Wireless Headphones. Before attempting to use your Wireless Headphones, please remove all parts from the box and read the installation and use instructions carefully. * Open field tested...
* If you are connecting to a stereo receiver or if your audio source has POWER LED two RCA output jacks (red and white in color), use the Y-connection CHANNEL TUNING WHEEL INDICATOR Cord that is included for connecting the transmitter to the the jacks marked AUDIO OUT or LINE OUT.
Page 4
INSTALLATION (continued) INSTALLATION (continued) Step 4: Step 5: Placing your thumb on the Battery Compartment Cover on the left Switch on your music device (TV, HiFi, CD, DVD etc.) to begin side of the headphone, gently push up in a sliding motion to remove playing your audio program.
SPECIFICATIONS OPERATION 1. Turn on the audio source (TV or audio component) to which the Model WHP140 transmitter is connected. Description Radio Frequency 2. Slide the ON/OFF switch on the headphone to “ON.” Wireless Headphones System 3. Listen to the volume coming from the ear cups on the headphone to...
TROUBLESHOOTING TROUBLESHOOTING (continued) If you encounter any trouble in setting up the Headphones, PROBLEM SOLUTION please check the following points: Interference: A) On the back of the transmitter, there is a PROBLEM SOLUTION CHANNEL TUNING THUMBWHEEL. Select a different frequency channel by Distorted sound A) Check if the sound of your audio source is turning the thumbwheel up or down.