WHP150 MANUAL(1J1500 ) 6/10/99 11:28 AM INTRODUCTION The 900 MHz stereo wireless headphone system uses latest wireless technology that enables you to enjoy music and TV sound anywhere inside or outside your home. You can simply connect the system to any sound source such as CD, TV, VCR, Hi-Fi and radio.
Just insert the mini plug on the audio cord into the jack on the adapter to convert the connector for this applica- tion. Then insert the red and white RCA plug ends into the equipment jacks marked “Audio Out” to make the audio source connection (see diagram).
Just rotate the thumb- wheel knob up or down and leave it set approximately in the middle of the range. 5) Adjust the tuning dial of the headphone to the frequency of the transmitter for best reception. NOTE You should now be able to walk freely from room to room without disruption.
WHP150 MANUAL(1J1500 ) 6/10/99 11:28 AM TROUBLE SHOOTING No Sound Ensure the AC adapter is fully inserted into the AC outlet and into the power connection input on the transmitter. Ensure the headphones ON/OFF switch is in the ON position.
To receive UHF or VHF stations or serve as a backup for cable outages, purchase the RCA ANT200. Switching between your cable or satellite and your antenna is made easy with an integrated A/B switch. Hooks up to any TV and includes all necessary accessories.
WHP150 MANUAL(1J1500 ) 6/10/99 11:28 AM Page 12 ONE YEAR LIMITED WARRANTY Thomson Consumer Electronics, Inc. warrants that for one year from the date of purchase this product is free from defects in material and workmanship. If the item is defective within that period, return it at your expense to the dealer from whom it was purchased together with proof of purchase for replacement.