Replacing Batteries - RCA WHP145 Quick Start Manual

Table of Contents

Advertisement

Available languages

Available languages

WARNINGS:
Never attempt to recharge non-rechargeable batteries.
Never use non-rechargeable batteries to replace the rechargeable (AAA size) batteries
supplied.
When the headphones are not in use, move the switch to the OFF position to avoid
damaging the batteries.
Always ensure that the headphones are switched to the Off position while the batteries are
charging.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as
sunshine, fire or the like.
IMPORTANT:
This unit should be operated with rechargeable batteries only. When replacing the batteries
or when disposing of the unit, always comply with applicable laws relating to the disposal
of batteries. Please place them in a proper disposal container to ensure that they are
eliminated safely and in an environmentally friendly way.

REPLACING BATTERIES

The rechargeable batteries supplied with your wireless headphones should last a long time.
If, however, you need to replace them, follow the directions for installing the headphone
batteries. Make sure you use AAA rechargeable batteries.
4. Connect the cradle/transmitter to an
audio source
The cradle/transmitter can be connected to the headphone jack of many kinds of audio
devices (like TVs, audio systems, VCRs, MP3 players, smartphones, or computers). It
can also be connected to the RCA stereo jacks (like those found on many TVs) using the
adapter provided.
To connect to your audio device:
1.
Find the headphone jack or other audio
output on your audio device.
Note: For best results with a TV, use its fixed audio output.
2.
Find the cable that runs from the back of
the cradle/transmitter.
3.
Connect to your audio device using one of
the methods below.
For headphone jacks, plug the end of the
cradle/transmitter's cable directly into the
jack.
For RCA stereo jacks, plug the cradle/
transmitter's cable into the provided Y
Adapter. Then plug the adapter's RCA
stereo connectors into the audio device's
stereo jacks.
Cradle/Transmitter back panel
—OR—
Headphone
jack
+
RCA jacks
3

Advertisement

Table of Contents
loading

Table of Contents