EGO POWER Plus ZT5200L Operator's Manual page 32

NOTE: Higher blade speed will significantly affect run time.
◾
The buttons to the right of the LCD screen control the blade speed.
◾
Press the "+" button to increase the speed, and the "–" button to lower speed. If you press and hold the "+" button
for more than 3 seconds, the mower will switch into "TURBO" mode, the highest blade speed, to tackle any grass
condition.
◾
When in "TURBO" mode, press the "–", and the blade speed will return to the previous speed mode.
Select your DRIVING SPEED LEVEL:
Level 1 and 2 (Low speeds) are intended for low-speed edging and trimming, or when mowing or driving in tight areas.
Level 3 (Standard speed) offers the best balance between cut quality and run time.
Level 4 (Max speed) is ideal to maximize the coverage area when mowing large, flat lawns).
NOTE: Higher driving speed will increase run time and coverage.
◾
The buttons to the left of the display control max driving speeds.
◾
Press the " " to increase the speed, and the "
NOTE: The driving speed cannot be adjusted during driving. The change will take effect only when the mower comes to a
complete stop and the lap bars are open.
15
32
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT5200L/ZT5200L-FC
" button to decrease the speed.