Auto Color Detection - Canon IMAGE FORMULA DR-2010C User Manual

The following tab functions are partially disabled according to the selected
mode.
Settings Tab
Scanning Mode
Black and White
Error Diffusion
Advanced Text Enhancement
Advanced Text Enhancement II
256-level Gray
24-bit Color

Auto Color Detection

: Available for setting
40
Basic Image processing Others
−
− −
−
− −
− − − −
−
: Not available for setting or automatically set
Back
Contents
Auto Color Detection
This section describes the procedure for setting the scanner to automatically
detect whether a document is in color or black-and-white when scanning.
1
In the ISIS/TWAIN driver properties dialog box, click the [Basic] tab →
select [Auto Color Detection] from the [Mode] drop-down list → click
[Setting].
2
−
Specify the various settings in the [Auto Image Type Detection Settings]
dialog box → click [OK].
The settings you can specify are as follows.
- [Color Saturation/Proportion of Color]
Normally scan with the default values (Color Saturation: 2, Proportion of Color:
2), but change the settings when you want to scan a color document as a black-
and-white document.
Color Saturation: change the setting towards "High" when you want to scan a
color document with low color saturation as a black-and-white document.
Proportion of Color: change the setting towards "High" when you want to scan
a colordocument with a low proportion of color as a black-and-white
document.
Previous Page Next Page
DR-2010C / DR-2510C DR-2010C / DR-2510C