Turning The Power On; Scanner Recognition - Canon IMAGE FORMULA DR-2010C User Manual

Canon scanner user manual
Hide thumbs Also See for IMAGE FORMULA DR-2010C:
Table of Contents

Advertisement

3
Connect the plug of the AC adapter to the power connector on the back of
the scanner.
4
Use the supplied USB cable to connect the scanner to the computer.
16
Back
Contents

3. Turning the Power ON

3. Turning the Power ON
3 Turning the Power ON
When you turn the computer and the scanner ON for the first time, the Plug and
Play function of Windows recognizes the scanner and automatically installs the
required device driver.
IMPORTANT
If you turn the power OFF, wait at least 10 seconds before turning it ON
again.
If you will not be using the scanner for an extended period, you should
disconnect the power cord from the AC outlet for safety.

Scanner Recognition

The scanner will be recognized the first time it is connected to the computer.
1
Make sure that the scanner and computer are connected properly.
2
Press the power switch on the back of the scanner to turn the scanner ON
(I side).
Previous Page Next Page
DR-2010C / DR-2510C
DR-2010C / DR-2510C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents