Advertisement
04. Precautions for mating
04-1. Precautions for mating in assembly
This product is designed to be small and thin. The product takes ease of handling into
consideration, but position shifts during mating and slanted mating may result in
contact buckling and deformation, so please perform mating work according to the
following procedure.
-Procedure-
(1)Position the child board block so there is a rough match between the socket and
header mating positions.
(2)Move the child board block gently to the left and right and up and down, and
check that the mating positions of the socket and header roughly match.
(3)Press with a light force, and mate the connectors.
Positioning and position checking
Mating
Panasonic Corporation
industrial.panasonic.com/ac/e/
Operation manual for Narrow-pitch connectors P5KF
Connector
Press
- 19 -
Board block
©
Panasonic Corporation 2017
ACCTF1E-4 201704
Advertisement
