Frigidaire PCFD3668AF Use & Care Manual page 9

Dual fuel range
Hide thumbs Also See for PCFD3668AF:
Table of Contents

Advertisement

IMPORTANT INSTRUCTIONS FOR SER-
VICE AND MAINTENANCE
Do not repair or replace any part of the
appliance unless specifically recom-
mended in the manuals. All other servicing
should be done only by a qualified techni-
cian. This reduces the risk of personal
injury and damage to the appliance.
Always contact your dealer, distributor,
service agent, or manufacturer about
problems or conditions you do not under-
stand.
Ask your dealer to recommend a qualified
technician and an authorized repair ser-
vice. Know how to disconnect the power
to the appliance at the circuit breaker or
fuse box in case of an emergency.
Remove the oven door from any unused
oven if it is to be stored or discarded.
Do not touch a hot oven light bulb with a
damp cloth. Doing so could cause the bulb
to break. Handle halogen lights (if pro-
vided) with paper towels or soft gloves.
Disconnect the appliance or shut off the
power to the appliance before removing
and replacing the bulb.
WARNING
California Residents: for cancer and
reproductive harm information, visit
www.P65Warnings.ca.gov.
Important: This appliance has been tested
and found to comply with the limits for a
class B digital device, pursuant to Part 18
of the FCC rules (United States) and ICES-
001 (Canada). These limits are designed to
provide reasonable protection against
harmful interference in a residential instal-
lation.
IMPORTANT SAFETY INSTRUCTIONS
This unit uses and can radiate radio fre-
quency energy that may interfere with
radio communications if not installed and
used in accordance with the instructions
manual. However, there is no guarantee
that interference will not occur in a partic-
ular installation. If this unit does cause
interference to radio or television recep-
tion, which can be determined by turning
the unit off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antennae.
• Increase distance between unit and
receiver.
• Connect the unit into an outlet or a
circuit different from the one to which
the receiver is connected.
9

Advertisement

Table of Contents
loading

Table of Contents