Remove The Entrance Cover; Attach The Assembly And Dismantling Stand - Xylem FLYGT P7030 Series Installation, Operation And Maintenance Manual

6 Maintenance

6.7.1 Remove the entrance cover

1. Remove the entrance cover screws.
2. Disconnect the cable leads.
3. Lift off the entrance cover.

6.7.2 Attach the assembly and dismantling stand

Two lifting devices are required for this task.
1. Bolt the assembly/dismantling stand (605 70 00) in position. Secure it using the screws
for the entrance cover.
68 P7030, P7035, P7040 Installation, Operation, and Maintenance Manual