Bradley Verge LVQ Series Installation Manual
Lavatory system with washbar technology
Hide thumbs
Also See for Verge LVQ Series:
- Installation manual (83 pages) ,
- Installation manual (74 pages) ,
- Installation manual (42 pages)
Table of Contents
Advertisement
215-1843 Rev. B; ECN 16-08-005T
© 2016 Bradley
Page 1 of 23
11/30/2016
Installation
LVQD2
Verge
Lavatory System - LVQ-Series
®
with WashBar
Technology
™
Table of Contents
Supplies Required .............................................................2
Components ...................................................................3-4
Dimensions ....................................................................5-6
Rough-Ins .......................................................................7-8
Bracket Mounting ...............................................................9
Drain Assembly .................................................................9
WashBar Installation ........................................................10
Aerator Installation ...........................................................10
Attach Soap Motor and Soap Container Bracket ............11
Bowl Mounting ................................................................12
Strainer and Drain Cap ....................................................12
Dryer Motor Assembly .....................................................13
Attach Power Line Filter ..................................................14
Control Box and Valve Installation ...................................15
Soap Installation ..............................................................16
Adjust Temperature ..........................................................17
Electrical Connections .....................................................17
Access Panel ...................................................................18
Master Control Box: Operation Modes .......................19-21
Cleaning and Maintenance .........................................22-23
Menomonee Falls, WI 53052 USA
800 BRADLEY (800 272 3539)
+1 262 251 6000
P.O. Box 309
bradleycorp.com
Advertisement
Table of Contents
Related Manuals for Bradley Verge LVQ Series
Summary of Contents for Bradley Verge LVQ Series
-
Page 1: Table Of Contents
Master Control Box: Operation Modes .......19-21 Cleaning and Maintenance .........22-23 P.O. Box 309 215-1843 Rev. B; ECN 16-08-005T Menomonee Falls, WI 53052 USA © 2016 Bradley 800 BRADLEY (800 272 3539) +1 262 251 6000 Page 1 of 23 11/30/2016 bradleycorp.com... -
Page 2: Supplies Required
• (2) Grounding Wires • Drill • Basin Wrench • Tape Measure • Phillips Screw Driver • Flat Head Screw Driver • Level • 5/16" nut driver • 5/16" socket (with or without extension) Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 3: Components
Plastic P-trap (269-1697) Master Control Box Adapter (2x) (S39-845) (261-147) #10 x 3/8" Screw (2x) (P18-054) DC Lead Free Valve DC Lead Free Valve Assembly, Single TMA Assembly, Single TL (S08-2402TMA) (S08-2402TL) Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... - Page 4 Foam Pump with Internal Press Fit Connection (269-2519) Dryer Motor (S39-844) Dryer Vibration Pad 4" x 10" (124-105) Gallon Jug (Not Shown) (Supplied by Others) Hook and Loop Strap (269-2574) Soap Tank Bracket (140-1171) Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016...
-
Page 5: Dimensions
2-3/4" (70) 11" (279) 11" (279) 5" (127) 21" (533) 14-3/8" (366) 13-1/2" (343) 56-3/4" (1443) Front View 59-3/4" (1518) 3-3/4" 5" 5" (95) (127) (127) 60" 20" (1524) (508) 50" (1270) Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... - Page 6 CSA Standard OBC/BCBC Standard 20" Height Height 33" (507) (839) 28-15/16" Dim A 33-1/2" (851mm) 33" (838mm) (735) 7-1/2" Dim B 29-29/32" (760mm) 28-15/16" (735mm) (189) Dim C 13-1/2" (536mm) 13" (330mm) Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016...
-
Page 7: Rough-Ins
#10 Wall Anchors for Soap Tank Bracket (100 lb pull out force) RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE 33½" No Adjustment Standard Height, ADA, TAS and CSA 30½" Subtract 3" Juvenile, ADA and TAS 33" Subtract ½" OBC/BCBC Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... - Page 8 17-1/2" (444) 2-1/4" (57) Finished Floor CODE DESCRIPTION QTY. 1½" NPT Drain, Stub-out 2" from wall ½" Nominal (⁵⁄₈" O.D. Comp.) Hot/Cold supplies, Stub-out 2" from wall 110V GFI protected electrical outlet Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016...
-
Page 9: Bracket Mounting
Screw Assemble the remaining components as shown and thread the four screws through the drain adapter and into the basin inserts. Ensure the screws compress the drain adapter evenly onto the basin. Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 10: Washbar Installation
1/4" union elbow. Aerator Installation Carefully thread the aerator into the WashBar casting using the red service key provided. Ensure no leaks after installation. Aerator (0.35 gpm or 0.5 gpm) Red Service Key Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 11: Attach Soap Motor And Soap Container Bracket
Once fitup is correct, remove soap container with pump attached and set aside. Soap container will be reattached in a later step. Motor Control Box Lever Soap Pump Flange Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 12: Bowl Mounting
Grommets should hold drain cap securely against drain tough walls. To remove drain cap, carefully slip flat screwdriver into left or right hand corner of drain cap and gently lift upwards. Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 13: Dryer Motor Assembly
Dryer Motor Foam Bumper Remove water detector and RJ45 connector from motor and discard. Dryer Motor Feet RJ45 Connector Cable Dryer Motor, 120V/60Hz Power Cord to GFCI Outlet Power Cord to DC Adapter Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 14: Attach Power Line Filter
LVQD2 Installation Attach Power Line Filter Secure dryer power line filter to underside of bowl using (2) #10 x 3/8" screws provided. Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 15: Control Box And Valve Installation
Cable extension for RH until it is fully seated. Tighten WashBar connects here. the compression nut by hand. Repeat this step for RH WashBar supply tube. Cold Inlet Hot Inlet Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 16: Soap Installation
6 to 8 times. For ease of soap container removal, pull tank while rotating bottom of tank out. Cable Tie Hook and Loop Strap Soap Container Top Flange Bracket Cable Tie Slot Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 17: Adjust Temperature
After all connections are made, the WashBar assembly as reference Master Control Box: Connector Plug to shown (Air/Water Sensor, Operation Modes section later Dryer Motor Soap Sensor and LED) in this manual. (Gray Cable) Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 18: Access Panel
Rotate access panel up and secure by rotating thumbscrews to the closed position To open access panel, rotate thumb screw, slightly push panel up and swing access panel down. Do not remove thumbscrews. Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... -
Page 19: Master Control Box: Operation Modes
2. Remove hands only when all LED lights turn solid white. LED lights may flash and cycle different colors. To activate this mode, only remove hands once all LED lights are solid white. Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016... - Page 20 2. Continue to hold hand under dryer until desired setting color is shown then remove hand while color is being displayed. • Red LED: High Speed (default when WashBar is reset) • Blue LED: Medium Speed • LED Off: Low Speed Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016...
- Page 21 Cycle counts are displayed x1000 (ex. 65 = 65,000) • REV followed by the software revision • SOP followed by the soap cycle count • H2O followed by the water cycle count • AIR followed by the dryer cycle count Bradley • 215-1843 Rev. B; ECN 16-08-005T 11/30/2016...
-
Page 22: Cleaning And Maintenance
Avoid contact with hot pans and objects. Repair Kits: Evero repair kits are available. Contact your Bradley representative or distributor for part numbers and pricing. Repair kits are made to order and have a shelf life of 30 days. - Page 23 Soap thickness is determined by a measurement called viscosity. Soap viscosity should be between 100 cps (centipoise) and 2500 cps for all Bradley soap dispensers. Thick soaps flow slower and inhibit the “flushing” action of the valves, which allows the soap to congeal in the valve and cause clogs.
Need help?
Do you have a question about the Verge LVQ Series and is the answer not in the manual?
Questions and answers