Service Mode; Reset To Factory Settings - BEA LZR-FLATSCAN SL Manual

CHECKING A VALUE
DETECTION FIELD ADJUSTMENT
increase/decrease the detection field of 1cm.
TEACH-IN
* refer to the teach-in process on page 5.
VISIBLE SPOTS
turn on/ off the visible spots.

SERVICE MODE

disable the output and LED for 15 minutes and can be helpful during an installation, a mechanical teach-in of the door or
maintenance work.

RESET TO FACTORY SETTINGS

factory reset of all values.
factory reset of all values except field dimensions, output redirection and configuration.
x = number of flashes = value of the parameter
2x
Launch detection field Teach-in*
Launch environment learning*
Launch VPB Teach-in*
x
= field width: 2.35 m
1x 3x 1x 5x
8