Advertisement
Salina spindle bed
3886 & 3887 Double/King Size Bed
Thank you for purchasing this salina bed. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
This item is HEAVY
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Please check the pack contents before attempting to assemble this product. A full checklist of components
is given in this leaflet. If any components are missing, please contact the retailer from whom you purchased
this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Necessary Tools
Ref: 00237/3886,3887
Advertisement
Table of Contents
Related Manuals for Ercol Salina 3886
Summary of Contents for Ercol Salina 3886
- Page 1 Salina spindle bed 3886 & 3887 Double/King Size Bed Thank you for purchasing this salina bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. This item is HEAVY Necessary Tools Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product Please check the pack contents before attempting to assemble this product.
- Page 2 Fittings and parts checklist Headboard*1 half moon washer*8 Footboard*1 dowels*8 dowels*8 side rails*2 spanner*1 spanner*1 centre rail*1 central brackets*2 slats double bed*32 washers*2 washers*2 slats king size bed*34 ends for slats double*64 nuts and bolts*2 each ends for slats king size*68 threads*8 threads*8 12mm screws*12...
- Page 3 Step by step assembly instructions 1. Push the threads G into the headboard and the footboard as shown below. Tighten the threads by hand ensuring that there is approximately half of the threads still showing. Fittings 2. Making sure the holes in the side rails C, are facing upwards, AND you have the Left and Right rails, (see page 2) on the correct sides, locate these side rails onto the protruding threads on the headboard and foot board.
- Page 4 5. Push a plastic cap onto each end of a slat and with the peg facing downwards push the slat into the pre drilled holes as shown below. Repeat for all the slats. Fittings 135CM F*64 150&180CM F*68 PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com...
Need help?
Do you have a question about the Salina 3886 and is the answer not in the manual?
Questions and answers