Sdd Square Fold Booklet-Maker With Two-Knife Trimmer - Canon Oce VarioPrint 110 Manual

6.14 SDD Square Fold Booklet-Maker with Two-Knife Trimmer

Item
Input Accessory
Pass Through Width
(No Trimming)
Booklet Trimming
Acceptable Paper
Weights
Trimming Width
Asymmetrical Trim
(Offset Capability)
Minimal Booklet Staple
Clearance (from Top to
Bottom)
Booklet Sheet Capacity
Maximum Productivity
Power Source
Maximum Power
Consumption
Dimensions (H x W x D)
Weight
*1 If a booklet's input height is greater than 12.60" (320 mm), it must be trimmed to 12.60" (320 mm) or
fewer inches/millimeters.
Version 7 Océ VarioPrint 110 Customer Expectations Document
Booklet Trimmer-D1 is required.
Approximately 8.27" (210 mm) to 12.60" (320 mm)
*1
Input Width : Approximately 8.27" (210 mm) to 12.60" (320 mm)
Output Width: Approximately 7.87" (200 mm) to 12.60" (320 mm)
Input/Output Length: Approximately 4.71" (120 mm) to 9.60" (244 mm)
16 lb bond to 110 lb cover (60 to 300 g/m
Each Side: 0.08" to 1.38" (2 mm to 35 mm)
Together: 0.16" to 2.76" (4 mm to 70 mm)
Approximately ±0.59" (15 mm)
Approximately 1.57" (40 mm)
Up to 25 sheets (100 pages per booklet or 5 mm in height, whichever is less)
2
(20 lb bond (80 g/m ))
Up to 800 booklets/hour (each booklet up to 100 pages)
2
(20 lb bond (80 g/m ))
120 V AC, 60 Hz, 15 A
Approximately 740 W
51" x 62.3" x 51.1" (1,295 mm x 1,582 mm x 1,298 mm)
(with the conveyor tray fully extended)
Approximately 573 lb (260 kg)
Specifications
2
)
Page 34