Table of Contents
Advertisement
6.19 SDD Square Fold Booklet-Maker with Two-Knife Trimmer
Item
Input Accessory
Pass Through Width
(No Trimming)
Booklet Trimming
Acceptable Paper
Weights
Trimming Width
Asymmetrical Trim
(Offset Capability)
Minimal Booklet Staple
Clearance (from Top to
Bottom)
Booklet Sheet Capacity
Maximum Productivity
Power Source
Maximum Power
Consumption
Dimensions (H x W x D)
Weight
*1 If a booklet's input height is greater than 12.60" (320 mm), it must be trimmed to 12.60" (320 mm) or
fewer inches/millimeters.
Version 2
Booklet Trimmer-D1 is required.
Approximately 8.27" (210 mm) to 12.60" (320 mm)
*1
Input Width
Output Width:
Input/Output Length:
16 lb bond to 110 lb cover (60 to 300 g/m
Each Side: 0.08" to 1.38" (2 mm to 35 mm)
Together:
0.16" to 2.76" (4 mm to 70 mm)
Approximately ±0.59" (15 mm)
Approximately 1.57" (40 mm)
Up to 25 sheets (20 lb bond (80 g/m
Up to 800 booklets/hour (up to 100 pages (20 lb bond (80 g/m
120 V AC, 60 Hz, 15 A
Approximately 740 W
51" x 62.3" x 51.1" (1,295 mm x 1,582 mm x 1,298 mm)
(with the conveyor tray fully extended)
Approximately 573 lb (260 kg)
imagePRESS C6010 Customer Expectations Document
Specifications
:
Approximately 8.27" (210 mm) to 12.60" (320 mm)
Approximately 7.87" (200 mm) to 12.60" (320 mm)
Approximately 4.71" (120 mm) to 9.60" (244 mm)
2
))
2
)
2
))
Page 42
Advertisement
Table of Contents
