Paper Handling And Storage - Canon Oce VarioPrint 110 Manual

15.4 Paper Handling and Storage

• The permissible humidity range for paper storage is 20% to 80% (with a room
temperature of 62.6°F to 82.4°F (17°C to 28°C)). Storing paper in a location that
does not meet these specifications may affect paper feeding and image quality.
• Only use paper that has fully acclimatized to the environment in which the
machine is installed. Using paper that has been stored in a different environment
(with a different temperature and humidity), may cause paper jams or result in
poor print quality.
• We recommend using paper immediately after opening the package. Rewrap any
remaining paper in its original package, and store it on a flat surface.
• Before loading paper, make sure to fan the sheets thoroughly so that air runs
through the sheets, as shown in the diagrams below.
• When you cut paper, the cutting sides of the paper must be made smooth. Use
an abrasive to make the four cutting sides smooth. Otherwise, streaks may
appear on the image, paper feeding may be affected, part life may be reduced, or
service calls may increase. Make sure to put the paper on a flat table to use the
abrasive, and move the abrasive perpendicular to the paper approximately three
times.
Version 7 Océ VarioPrint 110 Customer Expectations Document Page 50