Advertisement
69.
Position and attach Right Door (4O) as per Steps 67-68. Door position may need slight
adjusting to open and close correctly. When satisfied, complete all 2" Black Headed Screws (Part I)
Note, Do not over tighten hinge screws when using screw gun.
71.
Attach Horizontal Door Stop - 1 1/2" x 2 1/2" x 64"
(Part 4R) with dado facing out, tight against door header.
Align so Dado cut is flush with Header leaving
approximately a 1" overhang in the doorway. Attach with
6 - 2" screws (Part E).
Toll Free 1-888-658-1658
Above Door Trim
70.
1/2" x 1 1/4" x 64" (Part 4Q) with 6 - 1 1/2"
Finishing Nails (Part F).
Leave small gap to allow for proper door
opening and closing.
www.outdoorlivingtoday.com
Page 30
Attach Above Door Trim -
Hor. Door Stop with Dado cut
sales@outdoorlivingtoday.com
Advertisement
