Advertisement
Gable Wall
28.
Locate and place Gable Wall (Part 2H) so gable framing sits flush with the inside of the top plate.
Center from front to rear using a Straight Edge to confirm angle of gable frame and Top Plate line up.
Adjust gable accordingly. From the outside, make sure gable flashing overhangs wall siding.
Temporarily attach gable walls to top plate.
Slight adjustment may be required later
29.
Temporarily attach gable walls to top plate with 2 - 2" screws (Part E). Screw from the bottom
of gable framing down into top plate. Gables may need slight adjustment in Step 39 and then be
completely attached with an additional 6 - 2" screws (Part E). Position 2nd Gable on side walls.
30.
Position and temporarily attach 2nd Gable as per Steps 28-29.
Toll Free 1-888-658-1658
Straight Edge
Gable Frame
www.outdoorlivingtoday.com
Page 17
Gable Flashing
sales@outdoorlivingtoday.com
Advertisement
