Advertisement
2. Wall Section
Side Top Plates
- 2 pcs. (Part 2E)
Angle cut on ends
Door Header
(Part 2D)
Door Jamb - 2 pcs.
(Part 2C)
Bottom Wall Plate - 6 pcs.
(Part 2B)
12.
Carefully lay a Wall Panel (Part 2A) face down. Locate a Wall Plate - 1 1/2" x 2 1/2" x 35"
(Part 2B) and position plate flush with framing and siding. Attach to bottom of wall framing with
3 - 2 1/2" screws (Part B). Complete all bottom wall plate attachments for remaining walls at this time.
Toll Free 1-888-658-1658
11.
With Plywood positioned
correctly on floor framing, attach
using 16 - 1 1/4" screws (Part C)
plywood
per sheet.
pushed together
at seam
Bottom Wall Plate
www.outdoorlivingtoday.com
Door goes on 70" side
Exploded view of all parts necessary to complete
the Wall Section. Identify all parts prior to starting.
Gable Walls - 2 pcs. (Part 2H)
Page 10
Completed Floor
Front and Rear Top
Plates - 2 pcs. (Part 2F)
Angle cut on edge
Wall Panels - 6 pcs.
(Part 2A)
sales@outdoorlivingtoday.com
75"
Advertisement
