Interlogix Simon XT Installation Manual page 7

To verify module status using the Simon XT versions 1.3+:
1. Press the arrow to scroll to System Test, then press OK.
2. Enter the installer code (default 4321) or master code (default 1234).
3. Press the arrow to scroll to Interactive Services, then press OK.
4. Press the arrow to scroll to LTE Module Status, then press OK.
LTE module statuses
The following table provides descriptions for each LTE module status. For more information on the referenced LED L1
error patterns, see LED L1
Status
Idle
Roaming
PowerSave Mode
Registering...
Connection Error
Radio Error
Server Error
Connected
Connecting...
Updating...
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Panels/Interlogix_Simon_XT/Interlogix_Simon_XT_...
(red).
Description
Most common state
Roaming on the partner network.
AC Power is Down
Same as three flashes on LED L1
Same as four Flashes on LED L1
Radio is not operating correctly, same as five flashes on
LED L1
Same as eight flashes on LED L1
Currently talking to Alarm.com Servers
In the process of connecting to Alarm.com
Updating Signal Level
Updated: Tue, 31 Mar 2020 20:51:49 GMT
7