Table of Contents
Advertisement
7105-M007-0
GB
Page 7 of 19
G1000A99NP - G800A121NP
• The workshop must be kept clean, dry and not
exposed to atmospheric agents. Make sure that the
working premises are properly lit.
The machine can be operated by a single operator.
Unauthorized personnel must remain outside the
working area, as shown in Fig._2.
Avoid any hazardous situations. Do not use air-
operated or electrical equipment when the shop is
damp or the floor slippery and do not expose such
tools to atmospheric agents.
• When operating and servicing this device, carefully
follow all in force safety and accident-prevention
precautions.
The device must not be operated by professionally
unskilled persons.
IN CASE OF A CHANCE SUPPLY
FAILURE (COMPRESSED AIR),
MOVE THE PEDALS TO THE NEU-
TRAL POSITION.
INSTRUCTIONS FOR
ASSEMBLY AND USE
5.0
HAVE THE MACHINE HANDLED BY SKILLED
PERSONNEL ONLY.
THE LIFTING EQUIPMENT MUST WITHSTAND
A MINIMUM RATED LOAD EQUAL TO THE
WEIGHT OF THE PACKED DEVICE (SEE PARA-
GRAPH "TECHNICAL SPECIFICATIONS").
The wheel lifting device is packed in a cardboard box
having the dimensions of 900x300x500.
Movement must be by pallet-lift or fork-lift trolley.
6.0
The cardboard box is supported with plastic strapping.
Cut the strapping with suitable scissors. Use a small
knife to cut along the lateral axis of the box and open
it like a fan.
It is also possible to unnail the cardboard box from
the pallet it is fixed to. After removing the packing,
and in the case of the device packed fully assembled,
check that the device is complete and that there is no
visible damage.
If the device is packed dismantled into its principal
parts, after removing the packing, lay the individual
parts on the floor and check them for any missing
components, damage, or irregularity.
If in doubt do not use the device and refer to profes-
sionally qualified personnel (to the seller).
The packing (plastic bags, expanded polystyrene, nails,
screws, timber, etc.) should not be left within reach
of children since it is potentially dangerous. These
materials should be deposited in the relevant collec-
tion points if they are pollutants or non biodegradable.
PACKING AND MOBILIZATION FOR
TRANSPORT
UNPACKING
DURING UNPACKING, ALWAYS
WEAR GLOVES TO PREVENT ANY
INJURY CAUSED BY CONTACT
WITH PACKAGING MATERIAL
(NAILS, ETC.).
THE BOX CONTAINING THE FIX-
TURES IS CONTAINED IN THE
WRAPPING. DO NOT THROW IT
AWAY WITH THE PACKING.
Advertisement
Table of Contents
