ADJ Eliminator Lighting FROST FX BAR W User Instructions page 10

INSTALLATION
Screw one clamp each via a M12 screw and nut into the Omega brackets. Insert the quick-lock fasteners
of the Omega brackets into the respective holes on the bottom of the Frost FX Bar W. Tighten the quick-
lock fasteners fully clockwise. Pull a safety cable through the safety cable attachment points located on
the base plate and over the trussing system or a safe fixation spot. Insert the end in the carabiner and
tighten the safety screw.
*SAFETY CABLE
ALWAYS ATTACH A SAFETY CABLE WHENEVER
INSTALLING THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE FIXTURE WILL
NOT DROP IF THE CLAMP FAILS.
10