To Use The Gps Logger Function - Icom ID-52A Manual

3. To use the GPS Logger function

Set whether or not to record the information received from GPS.
When "ON" is set, the data received by GPS is recorded on a microSD card for each recording interval.
How to set the GPS Logger function
1. Push [MENU] on the transceiver.
2. Select "GPS."
• The GPS screen is displayed.
3. Select "GPS Logger."
4. Select "GPS Logger."
5. Select "ON."
6. To exit the MENU screen, push [MENU].
• The standby screen is displayed, and starts the GPS Logger function.
NOTE: When using an external GPS, only the supported sentence is recorded among GGA, RMC, GSA, and VTG.
About the GPS POSITION screen
When the GPS signal is received, recording
is automatically started.
The recorded information is displayed as shown
the right, and can be checked in real-time.
GPS Logger Only mode
This mode is useful when you do not want to use the transceiver for communication while moving, and want to
use it only as a GPS Logger for a long time. It also helps to protect the battery from draining.
Your course heading
Course direction
Displays My position
4
Latitude
Longitude
Grid Locator
Altitude
Speed
Time