Table of Contents
Advertisement
English
Fueling
Preparations
Before fueling, clean the filler cap
N
and the area around it to ensure that
no dirt falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
Position the machine so that the
N
filler cap is facing up.
WARNING
In order to reduce the risk of fire and
personal injury from escaping gas vapor
and fumes, remove the fuel filler cap
carefully so as to allow any pressure
build-up in the tank to release slowly.
18
Opening the threaded filler cap
Turn the cap counterclockwise until
N
it can be removed from the tank
opening.
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the threaded filler cap
Position cap.
N
Turn the cap clockwise as far as it
N
will go and tighten it as securely as
possible by hand.
Starting / Stopping the
Engine
Control handle
Controls
7
3
2
1
1
Throttle trigger lockout
2
Throttle trigger
3
Slide control
Positions of slide control
4
STOP-0 – engine off – ignition is
switched off
5
F – normal run position – the engine
is running or can start
6
START – ignition is switched on –
the engine can start
FC 95, FC 110
4
5
6
Advertisement
Table of Contents
