Advertisement
No draining. (With PUMP MODEL)
7-4-4 Inspection After Repair
Inspection Item
Check grounding
Check the safety system
Dressing the lead wires
Check the locking nuts and screws Check that the nuts and screws are securely locked, and be sure to apply screw
Check inside the washing machine Check for any vinyl wires, screws, or foreign materials inside the washing machine.
Check for oil (lubricant) or water
leakage
Checking the connection of the
power cord
Adjustment of horizontal level of
the washing machine
Check that the original grounding wire of the washing machine is securely grounded.
Connection of the grounding wire? wire to a gas or water pipe made of vinyl chloride
is very dangerous.
Check the operation of the brake. If the following braking times are exceeded,
readjust or repair the brake system.
Load
No load
Rated load (8.0/9.0kg)
Tie the lead wires with a separate wire to prevent them from scattering.
Check that they are securely connected.
lock.
In particular, check the surrounding areas of driving units for oil (lubricant) leakage,
and check the moving parts of the drain valve for water leakage.
Check the power cord, plug, and receptacle for any damage. Make sure they
comply
Adjust the height of the two adjusting legs (front of the washing machine) so that
the washing machine is horizontally level.
30
Description
Braking Time
Below 7 seconds
Below 10 seconds
Hide quick links:
Advertisement
